Sebring Convertible V6-2.7L Flex Fuel (2008)
Pressure Regulating Solenoid: Service and Repair
Pressure Control Solenoid
Removal
REMOVAL
1. Remove the valve body from the transmission See: Valve Body/Service and Repair/Removal and Replacement/Removal.
2. Remove the electrical connectors from the pressure control solenoid (1) and the line pressure sensor (2).
3. Remove the screws (6) holding the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
4. Remove the pressure control solenoid and line pressure sensor from the valve body.
Installation
INSTALLATION