Sebring Coupe V6-3.0L VIN H (2005)
-
When the secret code for four transmitters has been registered;
-
When one minute has been passed after registration mode started;
-
When scan tool MB991502 is disconnected (the ground connection is broken);
-
When the key is removed from the key cylinder;
9. After the registration is completed, carry out the following work, and then check that the keyless entry system operates normally.
-
Remove the ignition key.
-
Close all of the doors.
Removal and Installation
DOOR HANDLE AND LATCH
Removal And Installation
INSTALLATION SERVICE POINT