Sebring Coupe V6-3.0L VIN H (2005)
STEP 11. Check the wiring harness between passenger's door lock actuator switch connector E-07 (terminal 3) and ground.
NOTE: Also check intermediate connector C-213 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If intermediate
connector C-213 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Are the wiring harness between passenger's door lock actuator switch connector E-07 (terminal 3) and ground in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The input signal from the passenger's door lock actuator switch should be able to be checked and the
functions, which are described in the "Technical Description (comment)," should work normally.
STEP 12. Check the passenger's door lock actuator switch connector E-07 and ETACS-ECU connector C-317 for loose, corroded or damaged