Sebring Coupe V6-3.0L VIN H (2005)
Shift Interlock: Testing and Inspection
Diagnosis By Symptom
Insp. Proc. 1: Selector Lvr Can Be Moved From "P" to "R" Pos. Without Depressing Brake Pdl
When Ign Key Is Not In LOCK Position
INSPECTION PROCEDURE 1: Selector Lever can be Moved from "P" to "R" Position without Depressing Brake Pedal when Ignition Key
is at any Position Other than "LOCK" (OFF) Position.
TECHNICAL DESCRIPTION (COMMENT)
Lock cam or shift lock cable may be defective.
TROUBLESHOOTING HINTS
^
Malfunction of lock cam
^
Malfunction of shift lock cable
DIAGNOSIS
STEP 1. Check the fit of the lock cam.
Q: Is the lock cam installed correctly?
YES: Go to Step 2.
NO: Install the lock cam correctly. When the brake pedal is released with the ignition key at other positions than "LOCK" (OFF) position, check
that the selector lever can not be moved from "P" position to "R" position.
STEP 2. Check the lock cam.
Q: Is the lock cam in good condition?
YES: Go to Step 3.
NO: Replace the lock cam. When the brake pedal is released with the ignition key at other positions than "LOCK" (OFF) position, check that the
selector lever can not be moved from "P" position to "R" position.
STEP 3. Check the fit of the shift lock cable.
Q: Is the shift lock cable installed correctly?
YES: Go to Step 4.
NO: Install the shift lock cable correctly. When the brake pedal is released with the ignition key at other positions than "LOCK" (OFF) position,
check that the selector lever can not be moved from "P" position to "R" position.
STEP 4. Check the shift lock cable.
Q: Is the shift lock cable in good condition?
YES: No action to be taken.
NO: Replace the shift lock cable. When the brake pedal is released with the ignition key at other positions than "LOCK" (OFF) position, check
that the selector lever can not be moved from "P" position to "R" position.
Insp. Proc. 2: Selector Lvr Cannot Be Moved From "P" to "R" Pos. With Brake Pdl Depressed When
Ign. Key Is Not In LOCK Position
INSPECTION PROCEDURE 2: Selector Lever cannot be Moved from "P" to "R" Position with Brake Pedal Depressed when Ignition Key is
at any Position Other than "LOCK" (OFF) Position.
TECHNICAL DESCRIPTION (COMMENT)
Selector lever assembly, shift lock cable, key interlock cable, transaxle control cable, or lock cam may be defective.
TROUBLESHOOTING HINTS
^
Malfunction of selector lever assembly
^
Malfunction of shift lock cable
^
Malfunction of key interlock cable
^
Malfunction of transaxle control cable
^
Malfunction of lock cam
DIAGNOSIS
STEP 1. Check the connection of lock cam and key interlock cable.
Q: Is the connection of lock cam and key interlock cable in good condition?
YES: Go to Step 2.
NO: Repair the connection of lock cam and shift lock cable. When the brake pedal is depressed with the ignition key at other positions than
"LOCK" (OFF) position, check that the selector lever can be moved from "P" position to "R" position.
STEP 2. Check the connection of selector lever assembly and shift transaxle control cable.
Q: Is the connection of selector lever assembly and shift transaxle control cable in good condition?