Sebring Coupe V6-3.0L VIN H (2005)
STEP 3. Check the lock cam.
Q: Is the lock cam in good condition?
YES: Go to Step 4.
NO: Replace the lock cam. Check that the ignition key can not be turned to the "LOCK" (OFF) position with the selector lever at any position
other than "P" position.
STEP 4. Check the fit of the key interlock cable.
Q: Is the key interlock cable installed correctly?
YES: Go to Step 5.
NO: Install the key interlock cable correctly. Check that the ignition key can not be turned to the "LOCK" (OFF) position with the selector lever at
any position other than "P" position.
STEP 5. Check the key interlock cable.
Q: Is the key interlock cable in good condition?
YES: Go to Step 6.
NO: Replace the key interlock cable. Check that the ignition key can not be turned to the "LOCK" (OFF) position with the selector lever at any
position other than "P" position.
STEP 6. Check the fit of the transaxle control cable.
Q: Is the transaxle control cable installed correctly?
YES: Replace the steering lock cylinder assembly. Check that the ignition key can not be turned to the "LOCK" (OFF) position with the selector
lever at any position other than "P" position.
NO: Install the transaxle control cable correctly. Check that the ignition key can not be turned to the "LOCK" (OFF) position with the selector
lever at any position other than "P" position.