Sebring LX Coupe V6-3.0L VIN H (2002)
CAUTION: Insert circlip to rack stopper hole whilst turning rack stopper clockwise.
Insert circlip to rack stopper hole through cylinder hole. Turn rack stopper clockwise and insert circlip firmly.
>>G<< 0IL SEAL/BALL BEARING INSTALLATION
Apply a coating of the DIAMOND ATF to the outside of the oil seal. Using special tools MB990938 and MB991203, press the oil seal into the
valve housing.
>>H<< SEAL RING INSTALLATION
Because the seal rings expand after installation, tighten after installing by using special tool MB991317 to compress the rings, or press down by
hand.
>>I<< 0IL SEAL INSTALLATION
CAUTION: To eliminate a seal malfunction at the valve housing alignment surface, the upper surface of the oil seal should project outward
approximately 1 mm (0.04 inch) from the housing edge surface.
Using special tool MB991152, press the oil seal into the valve housing.
>>J<< END PLUG INSTALLATION
