Sebring LXI Convertible V6-2.7L VIN R (2002)
Transmission Shift Position Indicator Lamp: Service and Repair
TRANSMISSION RANGE INDICATOR ILLUMINATION
REMOVAL
1. Remove gear shift knob
2. Using a plastic trim stick, Special Tool C-4755, disengage the forward or rear edge of transmission range indicator bezel from floor console.
3. Pull upward carefully on transmission range indicator bezel and disengage tabs from rear floor console bezel.
4. Disconnect wire connector to lamp assembly
5. Remove transmission range indicator bezel and lamp assembly from vehicle.
INSTALLATION
1. Position transmission range indicator bezel and lamp assembly to vehicle.
2. Connect wire connector to lamp assembly.
3. Engage tabs on transmission range indicator bezel to slots in rear floor console bezel.
4. Push downward on transmission range indicator bezel to engage to bezel to floor console.
