Sebring LXI Convertible V6-2.7L VIN R (2002)
Power Steering Pump: Service and Repair
Power Steering Pump Pulley
DISASSEMBLY - PUMP (PULLEY)
1. Remove power steering pump from engine.
CAUTION: Do not hammer on power steering pump pulley or shaft to remove power steering pump pulley. This will damage the pulley and the
power steering pump.
2. Mount Puller, Special Tool C-4333, on power steering pump pulley. Mount puller (with power steering pump) in a vise. This will keep shaft of
power steering pump from turning while removing pulley.
3. Tighten puller and remove pulley from shaft of power steering pump.
NOTE: Replace power steering pump pulley if bent, cracked, or loose.
ASSEMBLY - PUMP (PULLEY)
CAUTION: Do not hammer on power steering pump pulley or shaft to install power steering pump pulley. This will damage the pulley and the power
steering pump.
Fig. 37
1. Place power steering pump pulley squarely on end of power steering pump shaft.