Sebring LXI Sedan V6-2.7L VIN R (2002)
5. Install vertical screws and inboard screw attaching quarter trim panel to inner quarter panel.
6. Place toe blade into slotted sill clip.
7. Install door sill trim panel.
8. Install speaker grille.
9. Install rear seat cushion and rear seat back.
Upper Quarter Trim
UPPER QUARTER TRIM
REMOVAL
1. Remove the door opening weatherstrips as necessary.
2. Remove rear seat cushion.
3. Remove bolt attaching rear seat belt anchor to floor.
Fig. 30
4. On vehicles equipped with a side curtain air bag, open the screw cap covers and remove the screws (Fig. 30).
5. Fold the seat back down.
Fig. 31
6. Disengage clips attaching upper quarter trim to inner quarter panel (Fig. 30) and (Fig. 31).
7. Route seat belt webbing through access hole in upper quarter trim.
8. Remove upper quarter trim panel from vehicle.
