Sebring LXI Sedan V6-2.7L VIN R (2002)
Radiator Support: Service and Repair
RADIATOR SUPPORT CROSS-MEMBER
REMOVAL
1. Release hood latch and open hood.
2. Remove push-in fasteners attaching fascia/ grille to radiator support crossmember.
3. Remove bolts attaching support braces to bottom of radiator support crossmember.
4. Remove bolts attaching crossmember to radiator closure panel.
5. Remove nuts attaching hood latch to radiator support crossmember.
6. Remove radiator support crossmember from vehicle.
INSTALLATION
1. Install radiator support crossmember to vehicle.
2. Install nuts attaching hood latch to radiator support crossmember.
3. Install bolts attaching crossmember to radiator closure panel.
4. Install bolts attaching support braces to bottom of radiator support crossmember.
5. Install push-in fasteners attaching fascia/grille to radiator support crossmember.
6. Close hood.
