Sebring LXI Sedan V6-2.7L VIN R (2002)
Brake Hose/Line: Testing and Inspection
INSPECTION - BRAKE TUBES AND HOSES
Flexible rubber hose is used at both front brakes and at the rear axle. Inspection of brake hoses should be performed whenever the brake system is
serviced and every 7,500 miles or 12 months, whichever comes first (every engine oil change).
Inspect hydraulic brake hoses for surface cracking, scuffing, or worn spots. If the fabric casing of the rubber hose becomes exposed due to cracks or
abrasions in the rubber hose cover, the hose should be replaced immediately. Eventual deterioration of the hose can take place with possible burst
failure. Faulty installation can cause twisting, resulting in wheel, tire, or chassis interference.
The brake tubing should be inspected periodically for evidence of physical damage or contact with moving or hot components. The flexible brake tube
sections used on this vehicle in the primary and secondary tubes from the master cylinder to the ABS hydraulic control unit connections must also be
inspected. This flexible tubing must be inspected for kinks, fraying and contact with other components or with the body of the vehicle.
