chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

ABOUT US
Auto Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)] > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3266

Sebring LXI Sedan V6-2.7L VIN R (2002)

Page 1
background image

Idle Air Control (IAC) Motor: Service and Repair

REMOVAL

1. Disconnect the negative battery cable.

Fig.18 Idle Air Control Motor

2. Disconnect the IAC electrical connector.
3. Remove the IAC mounting screws.
4. Remove the IAC.

INSTALLATION

1. Install the IAC to the throttle body.
2. Tighten mounting screws to 5.1 N.m (45 in. lbs) torque
3. Attach electrical connector to the IAC
4. Connect the negative battery cable

Auto Shut Down (ASD) Relay <--> [Main Relay (Computer/Fuel System)] > < Idle Air Control (IAC) Motor <--> [Idle Speed/Throttle Actuator - Electronic]|Specifications|Page 3266