Sebring Sedan L4-2.4L (2007)
NOTE: Align the pins on the mode door levers with the grooves in the back of the mode door cam prior to installation of the cam.
6. Align the mode door levers on the right side of the air distribution housing (2) to the mode door cam (1) and install the cam onto the housing.
Make sure the levers are correctly engaged to the cam.
7. Position the mode door actuator (2) and bracket (3) onto the right side of the HVAC air distribution housing (4). If necessary, rotate the actuator
slightly to align the splines on the actuator output shaft with those in the mode door cam.
8. Install the screws (1) that secure the mode door actuator bracket to the air distribution housing. Tighten the screws to 2 Nm (17 in. lbs.).