Sebring Sedan L4-2.4L (2007)
9. Install new oil filter (1), tighten to 14 Nm (10 ft. lbs.).
10. Lower vehicle and fill crankcase with specified type and amount of engine oil.
11. Install oil fill cap.
12. Start engine and inspect for leaks.
13. Stop engine and inspect oil level.
OIL FILTER SPECIFICATION
All engines are equipped with a high quality full-flow, disposable type oil filter. Replace oil filter with a Mopar(R) or the equivalent.
USED ENGINE OIL DISPOSAL
Care should be exercised when disposing used engine oil after it has been drained from a vehicle engine. Refer to the WARNING listed above.