Sebring Sedan L4-2.4L (2007)
The right (wiper) multi-function switch provides the vehicle operator with a control interface for the following wiper and washer system functions:
-
Continuous Front Wipers - The right multi-function switch control knob provides detent switching for two continuous front wipe modes, low
speed or high speed.
-
Intermittent Front Wipers - The right multi-function switch control knob provides detent switching for the intermittent front wipe mode with
five minor detent delay interval positions.
-
Front Wiper Mist Mode - The right multi-function switch control stalk includes momentary switching of the front wiper motor low speed circuit
to provide a mist mode features (sometimes referred to as pulse wipe), which allows the vehicle operator to momentarily operate the front wipers
for one or more complete cycles.
-
Front Washer Mode - The right multi-function switch control stalk provides momentary switching for control of the front washer system
operation.
The right multi-function switch cannot be adjusted or repaired. If any function of the switch is ineffective, or if the switch is damaged, the entire switch
unit must be replaced. The clockspring (with the multi-function switch mounting bracket), the left multi-function switch (with the SCM), the right
multi-function switch and the jumper wire harness are each available for separate service replacement.
