Sebring Sedan L4-2.4L (2007)
Windshield Washer Reservoir: Service and Repair
Removal
REMOVAL
1. Disconnect and isolate the battery negative remote cable.
2. Disconnect washer fluid hose at in-line connector on top of the right shock tower.
3. Partially remove bumper fascia as needed to gain access to the reservoir.
4. Disconnect wire connector from washer pump and harness mounting tab.
5. Remove washer reservoir mounting bolts (2).
6. Drop reservoir (3) down and away from vehicle.
7. Drain washer fluid from reservoir (3) into an appropriate container.
