Sebring Sedan L4-2.4L VIN J (2004)
INSTALLATION
1. Install lower run channel through opening at top of door.
2. Push glass run weatherstrip to door glass opening frame.
3. Install bolt attaching bottom of front lower run channel to inner door panel.
4. Install door glass.
Door Glass Inner Belt Stabilizer
DOOR GLASS INNER BELT STABILIZER
REMOVAL
1. Remove door trim panel.
2. Lift inner belt weatherstrip as necessary to access nut.
3. Remove nut attaching inner belt stabilizer to door panel.
Fig. 17
4. Remove inner belt stabilizer from door (Fig. 17).
INSTALLATION
1. Place inner belt stabilizer into position.
2. Lift inner belt weatherstrip as necessary to access nut.
3. Install nut attaching inner belt stabilizer to door panel. Adjust inner belt stabilizer against glass with enough tension to allow free up and down
movement.
4. Install door trim panel.
Door Inner Belt Weatherstrip
DOOR INNER BELT WEATHERSTRIP
REMOVAL
1. Remove door trim panel.