Sebring Sedan L4-2.4L VIN J (2004)
Service Port HVAC: Description and Operation
The high pressure service port is located on the receiver drier. The low pressure service port is located on the suction line, near the right strut tower.
Each of the service ports has a threaded plastic protective cap installed over it from the factory. After servicing the refrigerant system, always reinstall
both of the service port caps.
The two refrigerant system service ports are used to charge/recover/recycle/evacuate and test the air conditioning refrigerant system. Unique service port
coupler sizes are used on the R-134a system to ensure the refrigerant system is not accidentally contaminated with R-12 refrigerant or refrigerant system
service equipment.
