Sebring Sedan L4-2.4L VIN J (2004)
Ignition Coil: Description and Operation
Ignition Coil
The ignition coil assembly for the 4 cylinder engines consists of 2 independent coils molded together. The coil assembly for the 4 cylinder engines is
mounted on the cylinder head cover. Spark plug cables route to each cylinder from the coil. The coil assemblies for the 2.7L are mounted on the head
cover. It is a coil on plug assembly and each cylinder has an ignition coil assembly.
The coil for the 4 cylinder engines fires two spark plugs every power stroke. One plug is the cylinder under compression, the other cylinder fires on the
exhaust stroke. The Powertrain Control Module (PCM) determines which of the coils to charge and fire at the correct time.
The Auto Shutdown (ASD) relay provides battery voltage to the ignition coil. The PCM provides a ground contact (circuit) for energizing the ignition
coil. When the PCM breaks the contact, the magnetic energy in the coil transfers to the secondary causing the spark. The PCM will de-energize the ASD
relay if it does not receive the crankshaft position sensor and camshaft position sensor inputs. Refer to Auto Shutdown (ASD) Relay-PCM Output for
relay operation.
