Sebring Sedan L4-2.4L VIN J (2004)
1.
Check the transmission fluid level. If fluid level is full proceed to Step # 2. If fluid level is low, diagnose and repair fluid leak. Proceed to Step # 3.
2.
Replace the transmission oil pump. Refer to the service information available in TechCONNECT Group-21, Transmission.
3.
Verify the controller has the latest software revision level.
4.
If the controller is at the latest revision level, no further action is necessary. If a flash update is available reprogram the controller as instructed in
Service Bulletin 21-006-03 Rev. A.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.