Sebring Sedan L4-2.4L VIN J (2004)
9. Check retaining ring installation on seal boot to ensure it is fully seated in seal boot groove and the ends are not twisted (Fig. 19). Also, make sure
upper sealing ring is on seal boot and correctly installed (Fig. 19). Check seal boot for damage before installing back on car.
10. Install lower control arm assembly back on vehicle.
Upper Ball Joint
UPPER BALL JOINT
DESCRIPTION
The ball joint is pressed into the upper control arm and has a tapered stud for attachment to the steering knuckle. The ball joint stud is attached and
locked into the steering knuckle using a special nut. The ball joint is a sealed-for-life type and requires no maintenance. If the ball joint is defective it
will require replacement of the entire upper control arm.