Sebring Sedan L4-2.4L VIN J (2004)
10. Remove the shock absorber rod lower isolator bushing and sleeve from the upper (shock absorber/ upper control arm) mounting bracket (Fig. 49).
Remove upper coil spring isolator from mounting bracket.
NOTE: If removal of the upper control arm is necessary, Refer to Control Arm/Service and Repair.
11. Remove the lower shock rod bushing retainer washer from the shock absorber rod (Fig. 50).
12. Remove the dust shield and cup as an assembly from the shock absorber rod by pulling both straight up and off the shock rod (Fig. 50). The jounce
bumper may come off at the same time. Remove the jounce bumper and metal collar.
13. Remove the lower spring isolator (Fig. 50) from the lower spring seat on the shock absorber.
14. Inspect the shock assembly components for these and replace as necessary: