Sebring Sedan L4-2.4L VIN X (2001)
Mirrors: Service and Repair
Side View Mirror
SIDE VIEW MIRROR
REMOVAL
Fig. 15
1. Remove side view mirror cover (Fig. 15).
2. Remove the door trim panel.
3. Disconnect power window mirror motor wire connector, if so equipped.
4. Disengage wire harness grommet from mirror flag, if so equipped.
5. Disconnect manual mirror adjuster from side mirror cover, if so equipped.
Fig. 16
6. Remove nuts attaching side view mirror to mirror flag (Fig. 16).
7. Remove side view mirror from vehicle.
INSTALLATION
1. Feed power mirror wire harness through hole in mirror flag and seat grommet. Do not pull on wire harness to seat grommet, if so equipped.
2. Route adjuster cables through hole in mirror flag, grommet. Do not pull on cables to seat grommet.
3. Position side view mirror to vehicle.
4. Install nuts attaching side view mirror to mirror flag.
5. Engage push in fastener attaching power mirror wire connector to inner door panel, if so equipped.