Sebring Sedan L4-2.4L VIN X (2001)
Valve Body: Service and Repair
Solenoid/Pressure Switch Assembly
REMOVAL
NOTE: If solenoid/pressure switch assembly is being replaced, it is necessary to perform the TCM Quick Learn Procedure.
1. Disconnect battery negative cable.
2. Remove air cleaner assembly.
3. Disconnect solenoid/pressure switch assembly connector.
4. Disconnect input speed sensor connector.
5. Remove input speed sensor (Fig. 291).
6. Remove three (3) solenoid/pressure switch assembly-to-transaxle case bolts (Fig. 292).