Sebring Sedan V6-2.7L Flex Fuel (2007)
Refer to the selection chart to properly select the main bearings. For an example, if the main bore grade is 3 and the journal grade is 2, the proper select
fit bearing would be (2) +0.003 mm (+0.0002 in.).
NOTE: Service main bearings have a number from 1-5 marked in ink on the bearing surface. For verification, use the MAIN BEARING
SELECTION CHART-2.7L for number to size identification.
The upper main bearing has a oil feed hole and a center groove to allow lubrication of the main journal and must be properly positioned in the block.
NOTE: Although cylinder bores are graded for size, there is only one piston size.