Sebring Sedan V6-2.7L Flex Fuel (2007)
vehicle.
11. On gasoline engine equipped models, carefully push the radiator (1) slightly rearward to gain access to the A/C condenser (2).
12. Connect the A/C discharge line (4) to the A/C condenser and install the retaining nut (3). Tighten the nut to 5 Nm (44 in. lbs.).
13. If equipped with a gasoline engine, reposition the radiator and install the upper radiator mounts.
14. If equipped with the 2.0L diesel engine, install the front fascia.
15. Reconnect the negative battery cable.
CAUTION: Do NOT run the engine with a vacuum pump in operation or with a vacuum present within the A/C system. Failure to follow
this caution will result in serious A/C compressor damage.
16. Evacuate the refrigerant system.
17. If the A/C condenser is being replaced, add 10 milliliters (0.3 fluid ounce) of refrigerant oil to the refrigerant system. When replacing multiple
A/C system components, refer to the Refrigerant Oil Capacities chart to determine how much oil should be added to the refrigerant system. Use
only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
18. Charge the A/C system.