Sebring Sedan V6-2.7L Flex Fuel (2007)
![background image](/chrysler/sebring_sedan/v6-2.7l_flex_fuel/Page-2513004.png)
22. Remove the nut (2) that secures the lower A/C suction line (3) to the A/C accumulator (1).
23. Disconnect the lower A/C suction line from the A/C accumulator and remove and discard the O-ring seal and gasket.
24. Install plugs in, or tape over the opened suction line fitting and the accumulator port.
25. Remove the nut (1) that secures the lower A/C suction line (2) to the A/C compressor (3).
26. Disconnect the lower A/C suction line from the A/C compressor and remove and discard the O-ring seal and gasket.
27. Install plugs in, or tape over the opened suction line fitting and the compressor port.
28. Remove the lower A/C suction line from the engine compartment.
Installation
INSTALLATION
CAUTION: Be certain to adjust the refrigerant oil level when servicing the A/C refrigerant system. Failure to properly adjust the refrigerant