Sebring Sedan V6-2.7L Flex Fuel (2007)
Technical Service Bulletin # G42
Date: 080101
Campaign - TIPM Software Update for Antitheft System
January 2008
Distributor/Dealer Service Instructions for:
Customer Satisfaction Notice G42
TIPM Re-Configure, Anti-Theft System
Models
2007 2008 (JS/PM/MK) Sebring, Avenger, Caliber, Compass and Patriot vehicles (International Markets Only)
NOTE:
This customer satisfaction notice applies only to the above vehicles built at the Sterling Heights Assembly Plant through July 25, 2007 (MDH
0725XX) and the Belvidere Assembly Plant through July 23, 2007 (MDH 0723XX).
IMPORTANT:
Many of the vehicles within the above build period have already been inspected or repaired and, therefore, have been excluded from this customer
satisfaction notice.
IMPORTANT:
Some of the involved vehicles may be in distributor/dealer used vehicle inventory. Distributors/Dealers should complete this recall service on these
vehicles before retail delivery. Distributors/Dealers should also perform this repair on vehicles in for service. Involved vehicles can be determined by
using the VIP inquiry process.
Subject
The Totally Integrated Power Module (TIPM) vehicles may be configured incorrectly preventing the Anti-Theft Security System from operating
properly.
Repair
The Totally Integrated Power Module (TIPM) must be Re-Configured.
Special Tools
These existing special tools are required to perform this repair.
Completion Reporting and Reimbursement
Claims for vehicles that have been serviced must be submitted on the DealerCONNECT Claim Entry Screen located on the Service tab. Claims
submitted will be used by Chrysler to record recall service completions and provide dealer payments.