Sebring Sedan V6-2.7L VIN T FFV (2003)
4. Install brake drum.
5. Thread flex hose tube nut into wheel cylinder port. Tighten tube nut to 17 Nm (145 in. lbs.) torque.
6. Install tire and wheel assembly. Tighten wheel mounting nuts to 135 Nm (100 ft. lbs.) torque.
7. Slowly rotate wheel and verify that brake drum lightly drags on shoes.
8. Lower vehicle.
9. Remove brake pedal depressor (holding) tool.
10. Bleed affected wheel cylinder/circuit as necessary.
11. Road test vehicle stopping in both forward and reverse directions. Automatic-adjuster will continue to adjust brakes as necessary during road test.