chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Blend Door Actuator Replacement|Page 4782 > < Blend Door Actuator Replacement|Page 4780
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Recirculation Door Actuator Replacement

RECIRCULATION DOOR ACTUATOR

REMOVAL

1. Disconnect negative battery cable.
2. Remove the instrument panel. Refer to Body for the procedures.

Recirculation Actuator

3. Remove actuator retaining screws and pull actuator straight off. Note actuator shaft position for installation reference.
4. Disconnect the electrical connection.

INSTALLATION

1. Connect wire harness connector to the recirculation door actuator.

Blend Door Actuator Replacement|Page 4782 > < Blend Door Actuator Replacement|Page 4780