Sebring Sedan V6-2.7L VIN T FFV (2003)
Seat Belt: Service and Repair
Seat Belt - Rear Inboard
REMOVAL
1. Remove rear seat cushion.
Seat Belt - Rear Inboard
2. Remove nut attaching seat belt to floor.
3. Remove seat belt from vehicle.
INSTALLATION
1. Place seat belt in position.
2. Install nut attaching seat belt to floor. Tighten nut to 61 ± 5 N.m (83 ± 5 ft. lbs.) torque.
3. Install rear seat cushion.