Sebring Sedan V6-3.5L (2009)
8. Install the seat cushion bolts (1). Tighten to 11 Nm (8 ft.lbs.).
9. Install the seat back to the seat frame.See: Seat Back Cover - Installation.
10. Install the seat to the vehicle.See: Service and Repair/Seat - Installation.
Rear
INSTALLATION
1. Install the cover to the foam.
2. Install the hog rings securing the seat cover to the foam.
3. Engage the J-hooks securing the seat cover to the cushion foam.
4. Install the rear seat cushion (3) from vehicle.
5. Guide the seat belts through loops.
6. Push downward at the forward edge of cushion and engage the retainer loops to the cups in the floor (2).
