Sebring Sedan V6-3.5L (2009)
![background image](/chrysler/sebring_sedan/v6-3.5l/Page-1569004.png)
8. Remove the speed sensor cable routing clips (4) from the trailing link.
9. Remove the screw fastening the cable routing clamp to the trailing link.
10. Unclip the wheel speed sensor head (1) from the spring-loaded retainer on the rear of the hub and bearing (2). Remove the sensor from the vehicle.
Front-Wheel-Drive
FRONT-WHEEL-DRIVE
NOTE: Before proceeding, See: Service Precautions/Technician Safety Information See: Service Precautions/Vehicle Damage Warnings .
1. Move aside the luggage compartment carpet as necessary to access the wheel speed sensor cable connector.