Sebring Sedan V6-3.5L (2009)
Crankshaft Main Bearing: Specifications
MAIN BEARING
Main Bearing Diametrical Clearance..............................................................................................................................0.032-0.062 mm (0.0013-0.0024 in.)
Bearing Clearance (Wear Limit)...........................................................................................................................................................0.070 mm (0.0027 in.)
DIA Out-of Round (MAX)....................................................................................................................................................................0.007 mm (0.0003 in.)
Diametrical Taper (MAX)...................................................................................................................................................................0.006 mm (0.00025 in.)
Main Journal Diameter...............................................................................................................................................63.987-64.013 mm (2.5192-2.5202 in.)
End Play..............................................................................................................................................................................0.048-0.260 mm (0.002-0.010 in.)
End Play (MAX).....................................................................................................................................................................................0.330 mm (0.013 in.)
Main Bearing Selection Chart
MAIN BEARING CAP
NOTE: The main bearing cap bolts must be tightened in the proper sequence. First the inner main cap bolts, secondly the windage tray bolts,
lastly the main cap tie (horizontal) bolts.
Inner main bearing cap bolts.....................................................................................................................................20 Nm + 1/4 turn (15 ft. lbs. + 1/4 turn).
Outer Main Cap Bolts................................................................................................................................................27 Nm + 1/4 turn (20 ft. lbs. + 1/4 turn)
Tie Bolts (Horizontal) .............................................................................................................................................................................28 Nm (250 in. lbs.).