Sebring Sedan V6-3.5L (2009)
9. Remove the 7 upper intake manifold retaining bolts (1) and the upper intake manifold (2). Clean all gasket sealing surfaces.
Intake Manifold Lower
LOWER INTAKE MANIFOLD
1. Disconnect the negative battery cable (1).
2. Perform fuel pressure release procedure. See: Cylinder Head Assembly/Fuel Pressure Release/Service and Repair
3. Drain the cooling system See: Cooling System/Service and Repair.
4. Disconnect the upper radiator hose (1) from the thermostat housing (2).
5. Remove the upper intake manifold See: .