Sebring Sedan V6-3.5L (2009)
Fog/Driving Lamp Bulb: Service and Repair
Fog Lamp Bulb - Removal
BULB
1. Disconnect and isolate battery negative cable.
2. Loosen or remove front lower fascia closeout See: Body and Frame/Bumper/Front Bumper/Front Bumper Cover / Fascia/Service and Repair/Front
Lower Fascia Closeout - Removal.
3. Disconnect wire connector (3) from back of fog lamp.
4. Rotate bulb base counterclockwise one quarter turn.
5. Pull bulb from back of lamp (2).
