Sebring Sedan V6-3.5L (2009)
8. Remove the hose clamps (5) attaching the fluid return hoses (7) to the power steering fluid cooler line (4). Separate the return hoses from the
cooler line.
9. Remove the return hose routing clamp screws (3) securing the return hose (7) to the frame rail.
10. Remove the return hose routing clamp screw (6) securing the return hose (7) to the frame rail.
11. Lower the vehicle.
12. Remove the return hose routing clamp screw (1) securing the return hose (7) to the body.
13. Remove the return hose from the vehicle.
Supply Hose
3.5L ENGINE
NOTE: Before proceeding, See: Steering and Suspension/Steering/Service Precautions .
1. Siphon as much fluid as possible from the power steering fluid reservoir.
2. Remove the clamp (3) securing the supply hose (2) to the power steering pump supply fitting (4), then remove the hose from the supply fitting.