Sebring Sedan V6-3.5L (2009)
4. Lower the coolant recovery container (4) to its mounted position and install the mounting screws (1).
5. Place the fluid reservoir end of the supply hose (2) onto the reservoir (7) supply fitting. Expand the hose clamp and slide it over the hose and
fitting. Secure the clamp once it is past the bead formed into the fluid reservoir fitting.
6. Fill and bleed the power steering system. See: Steering and Suspension/Steering/Service and Repair/Steering - Power Steering System Bleeding
7. Check for leaks.
