TC BY Maserati L4-135 2313cc 2.2L SOHC Turbo VIN P FI (1989)
To loosen the accumulator, work on the upper part with an 8 mm Allen wrench, holding the spacer with a 19 mm open-end wrench.
To remove the spacer, use the 19 mm open-end wrench again and slip it out.
CAUTION: During the following operations, be careful not to damage the tubing section housed inside the spacer.
Remove the pressure switch with 36 mm deep socket.
To remove the high-pressure hose, loosen the two fittings, make sure the hose has no cracks or cuts; if in doubt, replace it together with the
0-Rings seals.
