TC BY Maserati V6-181 2972cc 3.0L SOHC VIN S FI (1991)
Crankshaft Position Sensor: Service and Repair
REMOVAL
Distributor 4-Way Electrical Connector
Distributor Cap
1.
Disconnect distributor lead wire at wiring harness connector.
2.
Remove distributor cap retaining screws and remove distributor cap.
3.
Rotate the engine crankshaft until the distributor rotor is pointing toward the intake plenum. Scribe a mark on the plenum at this point to indicate
the position of the rotor for reference when reinstalling the distributor.
4.
Remove the distributor hold down nut and remove the distributor from the engine.
DISASSEMBLY
Cover