Town & Country V6-3.3L Flex Fuel (2008)
Rear Bumper Cover / Fascia: Service and Repair
Rear Fascia - Installation
INSTALLATION
1. Install park assist sensor(s) (2), if necessary.See: Accessories and Optional Equipment/Collision Avoidance and Parking Assist Systems/Parking
Assist Distance Sensor/Service and Repair/Park Assist Sensor - Installation.
2. Connect the rear park assist wire connector (1), if equipped.
3. Position the rear fascia (4) on the vehicle.
4. Install the front edge of the fascia (3) under the liftgate tower (1). Install the screws (2) in liftgate tower right side and left sides. Tighten the
screws to 5.5 Nm (49 in.lbs.).