Town & Country V6-3.3L Flex Fuel (2008)
6. Remove the four screws (1 and 3) that secure the seat back hinge panel (4) to the seat back hinges (2) and remove the panel.
7. With the seat back hinges (4) in the fold forward position, remove the four bolts (1 and 3) that secure the hinges to the seat back frame (2).
8. Disengage the spring arms (5) and remove the seat back hinges from the seat back frame.
Installation
INSTALLATION
NOTE: Right seat shown in illustrations. Left seat similar.
1. With the seat back hinges (4) in the fold forward position, engage the spring arms (5) to the rear of the seat back frame (2).
2. Position the seat back hinges to the seat back frame and install the four retaining bolts (1 and 3). Tighten the bolts to 48 Nm (35 ft. lbs.).