Town & Country V6-3.3L Flex Fuel (2008)
Front Engine Mount
REMOVAL
1. Support the engine and transmission assembly with a floor jack so it will not rotate.
2. Remove the front engine mount thru bolt (3) from the insulator and front crossmember mounting bracket (2).
3. Remove the air dam to allow access to the front mount screws.
4. Remove the front engine mount bolts and remove the insulator assembly (1).
5. Remove the front mounting bracket, if necessary.
Rear Engine Mount
REMOVAL
1. Raise vehicle on hoist.
2. Remove the rear mount heat shield (2).
3. Remove the thru bolt (3) from the mount (4) and rear mount bracket (2).
4. Remove the mount bolts (1).
5. Remove the rear mount (4).