chrysler Workshop Repair Guides

Chrysler Workshop Service and Repair Manuals

Removal and Replacement|Page 8442 > < Removal and Replacement|Page 8440
Page 11
background image

10. Lower the vehicle.
11. Remove right rear quarter trim panelSee: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel Trim/Quarter

Trim Panel - Removal.

12. Remove the metal support strap from the rear quarter panel and floor.
13. Remove the rear floor distribution ductSee: Air Duct/Service and Repair/Rear Floor Distribution Ducts - Removal.
14. Remove the rear ceiling distribution ductsSee: Air Duct/Service and Repair/Rear Ceiling Distribution Ducts - Removal.
15. Disconnect the body wire harness from the rear heater-A/C wire harness connector (6).
16. Remove the two nuts (2) that secure the rear heater core tubes (8) to the floor panel (9).
17. Remove the bolt (7) that secures the rear heater core tubes to the right inner quarter panel (1).
18. Remove the two bolts (5) that secure the rear heater-A/C housing (4) to the two metal brackets (3) located on the rear inner quarter panel and

remove the housing.

Rear HVAC Housing Installation

INSTALLATION

1. Position the rear heater-A/C housing (4) into the vehicle.
2. Install the two bolts (5) that secure the rear heater-A/C housing to the two brackets (3) located on the rear inner quarter panel (1). Tighten the bolts

to 3 Nm (27 in. lbs.).

3. Install the two nuts (2) that secure the rear heater core tubes (8) to the floor panel (9). Tighten the nuts to 3 Nm (27 in. lbs.).
4. Install the bolt (7) that secures the rear heater core tubes to the rear inner quarter panel. Tighten the bolt to 3 Nm (27 in. lbs.).
5. Connect the body wire harness to the rear heater-A/C wire harness connector (6).
6. Install the rear ceiling distribution ductSee: Air Duct/Service and Repair/Rear Ceiling Distribution Ducts - Installation.
7. Install the rear floor distribution ductSee: Air Duct/Service and Repair/Rear Floor Distribution Ducts - Installation.
8. Install the metal support strap to the rear quarter panel and floor. Tighten the fasteners securely.
9. Install the right rear quarter panel trimSee: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Quarter Panel Trim/Quarter

Trim Panel - Installation.

Removal and Replacement|Page 8442 > < Removal and Replacement|Page 8440