Town & Country V6-3.3L Flex Fuel (2008)
Fluid Pressure Sensor/Switch: Service and Repair
Sensor-Line Pressure
Removal
REMOVAL
1. Remove the valve body from the transmissionSee: Valve Body/Service and Repair/Removal and Replacement/Removal.
2. Remove the electrical connectors from the pressure control solenoid (1) and the line pressure sensor (2).
3. Remove the screws (6) holding the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
4. Remove the pressure control solenoid and line pressure sensor from the valve body.
Installation
INSTALLATION
1. Install the pressure control solenoid (1) and line pressure sensor (2) into the valve body.
2. Install the screws (6) to hold the pressure control solenoid (1) and line pressure sensor (2) to the valve body.
3. Install the electrical connectors to the pressure control solenoid (1) and the line pressure sensor (2).
4. Install the valve body into the transmissionSee: Valve Body/Service and Repair/Removal and Replacement/Installation.