Town & Country V6-3.6L (2011)
3. Connect the USB harness (PN # 82212160) as shown in (Fig. 1).
4. Reconnect the battery.
5. Return to the Perform Software Reflash Procedure Step # 3.
6. Disconnect and isolate the battery negative cable.
7. Reinstall HFM Module by following steps 2 through 5 in DealerConnect / TechCONNECT > Group 08 - Electrical > 81 -
Navigation/Telecommunications > MODULE, Hands Free (HFM) > Installation - INSTALLATION.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.
