Town & Country V6-3.6L (2011)
21. Position the spline guard and reinstall the four screws (Fig. 8).
22. Fold the gear guard flaps back into place (Fig. 7).
23. Re-Zip the seat back skin and tuck away the zipper cursor (Fig. 6).
24. Fasten the seat back J-Clip (Fig. 5).
25. Reinstall the seat side shields for the right and left side (Fig. 4).
26. Position the grocery guard and secure the clip (Fig. 3).
27. Install the 40% (right) side seat. Refer to the detailed installation procedures available in DealerConnect > TechCONNECT under: Service Info >
23-Body > Seats, Third Row, Power Folding > Seat > Install.
28. With the seat in the full stow position install the two screws for the grocery shield (Fig. 2).
29. Cycle the third row power stow and go seat function two times to verify the seat fully stows. Did the 40% seat fully stow?
a. Yes >>> Proceed to Step # 30.
b. No >>> Continue further diagnosis, this bulletin does not apply.
30. Return the vehicle to the customer or dealer inventory.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
FAILURE CODE:
Disclaimer:
This bulletin is supplied as technical information only and is not an authorization for repair.