Town & Country V6-3.8L (2009)
1. Remove the two screws (3) that secure the rear of the seat cushion side shield (2) to the seat.
2. Disengage the retaining tabs that secure the center of the seat cushion side shield to the seat by carefully pulling the center of the shield straight out
from the side of the seat.
3. Disengage the retaining tabs that secure the front of the seat cushion side shield to the seat by simultaneously sliding the side shield upward and
forward.
4. Disengage the seat belt buckle (1) from the seat cushion side shield and remove the shield.
Second Row, Swivel - Upper Swivel
REMOVAL
NOTE: Right seat shown in illustrations. Left seat similar.
1. Remove the seat back hinge covers See: Seat Cover/Service and Repair/Seat Back Hinge Cover - Removal
2. Using trim stick C-4755 or equivalent, disengage the retaining tabs that secure the seat cushion front shield (1) to the front of the seat (2) and
remove the shield.