Town & Country V6-3.8L (2009)
15. Remove the bolt (1) that secures the passenger side of the HVAC air distribution housing (4) to the underside of the instrument panel support (3).
16. Disconnect the instrument panel wire harness from the HVAC wire harness connector (2).
17. Remove the bolt (1) that secures the passenger side end of the HVAC housing (3) to the underside of the instrument panel support (2).
18. Carefully remove the HVAC housing from the instrument panel.
19. Remove the defroster duct from the top of the HVAC air distribution housing See: Air Duct/Service and Repair/Defroster Duct - Removal.
Front HVAC Housing Installation
HOUSING-HVAC
NOTE: Replacement of the refrigerant line seals is required anytime a refrigerant line or expansion valve is disconnected or removed. Failure
to replace the rubber and metal dual-plane seals may result in a refrigerant system leak.