Town & Country V6-3.8L (2009)
EGR Tube: Service and Repair
Exhaust Gas Recirculation (EGR) Tube - Installation
3.3, 3.8L
NOTE: Inspect rubber silicone seal for wear or cracks, replace as necessary. Make sure that the silicone rubber seal is undamaged during
installation.
1. Install new silicone rubber seal to the intake manifold, if necessary.
CAUTION: DO NOT use air tools to install bolts to intake manifold. The intake manifold is made of plastic and it is critical to install bolts
using hand tools only. Torque all fasteners to specification. The use of air tools can cause the threads of the intake manifold to
become stripped.
2. Install the exhaust gas recirculate (EGR) tube and bolts to the intake manifold. Tighten bolts to 5.5 Nm (48.5 in. lbs.).